1. All material default for importing iron Figure Han drilling or other materials, except for specially marked. The Company drilled for the first-class imported Han quality, brightness not comparable to ordinary hot drill. If you experience the pursuit of perfection, then drill Austrian (Swarovski diamond) When is the best choice. ^ _ ^ Hot drill a general hot hot temperature at 150 degrees Celsius to prison.

   2. The drilling pattern below a layer of hot band lines of the white substrate thrown off, then drill chart adhesive sticky trap placed in the clothes you see fit to place his hand pressed flat, [sticky side down] If the drilling relatively large, or there are several different types and sizes of drilling or film, you should put clothes, in turn, from the hot side of fabric.

3. Iron transferred to fabric for your clothes stalls [recommend transferred to the wool file], their clothes into a relatively flat operating table, with iron map the surface of the hot pressing iron, until the drill at the end of gum melt, From the corner of the slowly unlock the hot stick figure to see whether all the drilling to the clothes, and if there are hot hot prison, says drilling is not enough, or non-uniform heating temperature, it continues to push ironing, until each iron are firmly stuck on your clothes drilling on the date.

   4. Ironing finished, and so hot after cooling diagram then peeled off the surface of that layer of sticky trap, a fine of scalding your own DIY drilling plan is complete.

     5.freeshipping

Intimate little reminder

1. Paste the process is not a will all crystals are Nianlao need to push for a while and slowly lifted a corner to see if there is not strong for a while until you continue ironing until all the Nianlao.

2. For the chemical fiber fabric temperature can not be too high, need to iron fabric with a layer of cotton between the pads.