Specifications: Elastic white/ clear Paste 1600/1600c Property A: 1600;White slurry paste appearance. 1600c Elastic transparent, beige slurry paste. B: was compounded by environment-friendly resin, imported additives, TiO2. C: Viscosity: 140,000-150,000 CPS. D: non-ion property. E: PH value: 6.5-7.0 F: Shelf Life: 1 year. (well sealed under normal temperature) Features: A: softer than 1500 and non-sticky. B: strong cover ability, high gloss and smooth. C: Don憈 block mesh, easy to operate. D: washing-resistance, high elasticity, high fastness. E: competitive in quality and price to the imported textile printing paste. Application 1. 100-120 mesh is suggested, to select different mesh based on different pattern. For normal cotton, two times printing by come-and-go, for high elastic fabric, apply 588 to render two times, then apply the well formulated paste . This can be ensure the best result. 2. This products can be directly used for dark fabric printing, if the pigment is need to be added at printing, please apply 1600c elastic clear paste to dilute the TIO2 to reduce the consumption of pigment, for the high elastic fabric, be better to apply 1600Cto render prior to printing white paste, this will enable no crack happen under heavy strength. 3. This type of paste must be cure at 140-150℃ for 2-3 minutes, for hot-pressing, 140-150℃ for 10-15 minutes. 4. Suggested Formulattion: 1600--30% 1600C-70% pigment: 5% (within) Fastness test There will be no crack and peel off happened on the printed material to stir 2 hours at 40℃ in the washing powder mixed water after the whole printing process finished. Anti-sticky test the printed portion will not be overlap or sticked each other to hot press for 30 seconds at 130℃(for special material, please add cross-linking agent to improve the fastness) Eco-Friendly Info: Testing Item Standard Test Result Conclusion Testing Method Formaldehyde infant≤20 3.14 Meet Infant standart GB18582-2001 Remarks: To adjust the shade of color based on customer's requirment, too much pigment will cause the discoloration, be better to control the consumption of pigment with 5%, if the dark color is needed, please add 2% color fixing agent PC100 ,but it will cause a little hard hand feel, so we strongly suggest to conduct the test before mass production to see whether the elasticity can meet requirment. Please conduct the test when printing on the discolored fabric to see whether the sublimation will happened.