Product Description: fiberglss self-adhesive tape is fiberglass mesh coated with acrylic. the alkaline-resistance of acrylic, the chemical stability and no oxygenated property of fiberglass make the tapes have following properties that other materials can not be compared with:
Product Apply:good performance of alkaline-resistance;
high tensile strength and deformation-resistance ;
excellent self-adhesive performance
well arranged simple and easy to be applied
The use of tape
Construction method:
1.Wall must be clean and dry
2.Center and apply tape over the length of the joint, pressing firmly.
3.Apply a generous first coat of compound over the tape and though the mesh, making sure to completely fill the joint crevice. when the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.
4.Let dry completely ,then sand slightly.
5.Apply sufficient thin finishing coats to produce a smooth wall surface.
6.Cut or butted boards do not have a tapered edge. therefore, special care must be taken to assure proper compound that will equire an increased amount of edge feathering.
caution:
1.Failure to completely fill the joint may result in cracking
2.For best results, use a setting-type compound.