- Technics: Nonwoven
needle-punched geotextile
Polyester Continuous filament needle-Punched Geotextile
needle-punched geotextile
Polyester Continuous filament needle-Punched Geotextile
1.Applications of geotextile
A.Filtration
The filtration layer of the dykes, river canal, seacoast, concrete slope, retaining walls. At the same time of preventing the clay granule from passing, it allows the water and the gas pass through freely.
B. Separation:
The isolation of the railway dregs and the roadbed, roadbed and the soft base, surface of the
airdrome and parking lot and the groundsill, different dam materials. It isolates the soil and the gravel of two kinds different granule pathway from the groundsill or other buildings.
C.Adding muscle:
The highway, railway, soil-stone dam, breakwater, airport, backfill soil of retaining wall, slope protection, etc in which distributes the earth stress, prevents the side-displacement of the earth body and improves the earth body stability.
D. Protection
It prevents the bank from being washed out, protects the bank and the bottom, prevents the water and soil from being washed away.
2.Properties:
High strength,anti-aging,Acid and Basic Resistance,abrasion resistance,flexibility,and easy for construction.
3.Specification:
100g/m2 - 800g/m2
4.Size of Package:
width 4m-6m,length 50m-100m (or at request).
5.Geotextile joints to connect
General Geotextile joints to connect there is overlap, welding and oversew three ways.
Note:If geotextile joints to connect on the flat ground, overlap width30cm.
If geotextile joints to connect not on the flat ground, overlap width50cm.
6.Filament spunbond nonwovens geotextile specifications: GB/T17639-1998
No. | Item | Specification | ||||||||||
Mass per square meter g/m2 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 800 | |
1 | Weight Variation % | -6 | -6 | -6 | -5 | -5 | -5 | -5 | -5 | -4 | -4 | -4 |
2 | Thickness mm ≥ | 0.8 | 1.2 | 1.6 | 1.9 | 2.2 | 2.5 | 2.8 | 3.1 | 3.4 | 4.2 | 5.5 |
3 | Width Variation % | -0.5 | ||||||||||
4 | Breaking Strength KN/m | 4.5 | 7.5 | 10.5 | 12.5 | 15 | 17.5 | 20.5 | 22.5 | 25.0 | 30.0 | 40.0 |
5 | Elongation at Break % | 40 ~ 80 | ||||||||||
6 | CBR Mullen Burst Strength KN ≥ | 0.8 | 1.4 | 1.8 | 2.2 | 2.6 | 3.0 | 3.5 | 4.0 | 4.7 | 5.5 | 7.0 |
7 | Sieve Size 090 (095) mm | 0.07 ~ 0.2 | ||||||||||
8 | Vertical Permeability Coefficient cm/s | (1.0-9.9) ×(10-1~ 10-3) | ||||||||||
9 | Tear Strength KN≥ | 0.14 | 0.21 | 0.28 | 0.35 | 0.42 | 0.49 | 0.56 | 0.63 | 0.70 | 0.82 | 1.10 |
10 | Anti-chemical corrosion | PH value is within the scope of 2-12 did not affect | ||||||||||
Anti-UV | Tensile strength retention rate | Outdoor aging two months later, the strength to keep the rate of> 70% | ||||||||||
Bursting strength retention rate | Outdoor aging three months later, the strength to keep the rate of> 70% | |||||||||||
Needle punched geotextile after treatment method: |
Note:
1Specifications according to the unit area quality, the actual specifications in the range of two adjacent table, according to the interpolation method to calculate the appropriate evaluation specification; beyond the scope of the table, the assessment specification to be negotiated by the supplier and buyer.
2The standard value by design or agreement.
3 Above targets data if the changes without notice.
4We can produce other specifications production according to users requirement.
Company Name: | Shandong Haoyang New Engineering Material Co., Ltd |
---|---|
Company Address: | Yingbin Road,High&New Technology Development Zone,Yucheng |
Zip: | 251200 |
Contact Person: | Mr. Bin Yu |
Telephone Number: | 86-534-7281882 |
Mobile: | 13573418839 |
Fax Number: | 86-534-7281898 |
Email: | hynewmaterial@sdhy.net,hyprocess@sdhy.net |
Homepage: | www.sdhy.net |