The conical shape of bobbin can be formed on the same machine.
The single spindle control,one electronic motor for one spindle(0.18KW),one frequency
converter self control device,the parameter can be adjusted freely,the speed is 1400-
1900turns/minute.
The auto stop can be controlled by electronic light control,auto stop when the bobbin is
full,memory storage,length calculater and counter,frequency converter makes even speed
decrease and makes the same tension strength,The inner and outer tightness and looss is the
same.
Slow  speed start 3-15 seconds, changeable take up quantity for the edges.
All the bearings are imported ones.
The loose straight bobbin dying,applying the double wheels over feed,double mini electronic
motors transmission for the transmission of the yarn to make the dying deeper and go
through without the colour difference.It can be applied for the dying bobbin wind for
string, yarn, chemical fibre DTY,silk and man made silk.

Size:One side,single spindle,automatic
control,four spindles for one segment.
Spindle distance:300millimeters
Spindle Quantity:8 spindles/set,12
spindles/set,16 spindles/set,20 spindles/set,
24spindles/set
Spindle speed:one set of 0.18KW electric
motor for one spindle under the control of
the frequency converter with the ability of
constant speed increase,constant speed
decrease and stepless speed change.The
spindle speed for the loose bobbin is
1600turns/minute, The spindle
speed for the tight bobbin is
1900turns/minute,2600turns/minute.
The form of the bobbin:straight shape,
conical shape.
The content for the bobbin:250g,500g,750g,1000g
and 2000g.They can be adjusted freely on one spindle.
The forming of the bobbin:applied the mode of gauge finer.
The straight and conical shape bobbin can take up and wind on every angle.
The power of the electric motor:0.18KW/spindle
The power distance:120-200millimeters,changeable take up quantity for the edges.
The outer diemension for the complete machine:8050(length x 990(width) x 1345(hight)
millimeters/24 spindles

Bobbin Winder.