PTFE(Teflon)Fusing Belt/PTFE Seamless Fusing Belt/Teflon Endless Fusing Belt/Hashima Fusing Seamless Belt/Oshima Fusing endless belt with guiding cord/Meyer Fusing Seamless Belts/

Applications.
Flatbed laminator systems are double belt presses with both in line heating and cooling sections. The materials that are laminated are often covered with a heat activated adhesive therefore the PTFE belt is an excellent choice due to its non stick properties. Also due to the high and low temperatures experienced immediately after each other within the process, the belts are well suited to handle this quick change in temperature.
Features / Benefits
The belts are usually supplied in antistatic black and are available in a number of thicknesses. Often supplied endless these belts can be fitted on site with specialist equipment if required
Material Properties
1) Smooth non stick PTFE coating
2) Temperature resistant from -73oc to plus 260oc
3) Antistatic properties
Additional Information
Antistatic PTFE glass cloth is usually offered in 0.25mm , 0.40mm,0.45mm & 0.50mm thick.
The joint is a smooth scarfed overlap type to prevent marking of the products.
Material is available up to 7000mm wide.

PTFE coated conveyor belts are often the belt of choice for machine manufacturers of fusing, laminating or powder coating lines due to the excellent extreme temperature resistance and non-stick properties the material offers.