PROCESS & COMPLETE LINE OF HAND-PICKED COTTON CLEANING & PROCESSING

Advanced Process  

The processing line consists of the automatic seed cotton feed section, the drying & seed cotton cleaning section the ginning & lint cleaning section and the lint baling section.
During processing, the seed cotton is thoroughly cleaned, its moisture content is effectively controlled, and the lint is well cleaned.
There are three-way valves in the seed cotton drying section, the seed cotton cleaning section and the lint cleaning section. Based upon the condition of raw cotton, the ginning process can be adjusted quickly, which both assures cotton quality and also reduces power consumption.

High efficiency

In light of the characteristics of the hand-picked upland cotton, the design of the principal units if the line is optimized by the engineers and the auxiliary units, such as the conveying section, are designed with great concentration, which gives full performance to their capabilities to maximize the economic returns of the line.
The line shows flexible adaptability to seed cotton moisture content. With 8% to 12% moisture, the seed cotton could be processed normally to produce quality lint with no need of being dried.

High Automation

The equipment and the process allow the setting of both manual and automatic operation modes with centralized control. In the auto mode, not only the automatic feed control is realized for the principal machines but also self-adjusting control can be realized for the whole line according to the operation situation.
All single machines are interlocked and further programmed for protection. Monitoring devices are installed on the key locations of the line to avoid accident.