Application:

　　GA014SF Soft winding machine can winding pure cotton yarn, chemical-fiber and blended yarns on Dyeing bobbin, it’s for preparing winding before yarn dyeing.

　　Main technical data:

　　Type: Double sides(Groove Drum)

　　*Number of spindles: 40, 60, 80, 100 ,120 (100 as the standard spindle number)

　　*Spindle Gauge: 254mm

　　*Guide Traverse: 152mm

　　*Winding speed: 350-400 meters/minute

　　*Grooved drum: Bakelite grooved drum ofφ80mm with 2 circles of the same distance.

　　*Drum guide travel: 147mm

　　*Grooved Drum transverse: 2.2mm , 3.2mm, two types.

　　*Traversing times of grooved drum: 14.2 times/minute.

　　*Bobbin: 0°, 3°3 0′, 4°20′or can be make-to-order against offered sample bobbin.

　　*Take up size:Φ180 (big Dia)×149mm (length)

　　*Density of cheese yarn on cones: 0.3 0-0.40g/cm3

　　*Yarn-break auto-stop device: Each spindle has an independent set of auto-stop device.

　　*Tension device: Tension balancing device is set with total 10 kinds of tension spacers (weight balancing can be carried out according to technical requirements).

　　*Yarn cleaning device: installed Blade for Yarn cleaning.

　　*Diameter of Drum’s belt pulley:Φ110mm

　　*Blank-bobbin conveyer device: It is equipped at the left and right side of the machine, and it’s used to convey blank bobbins from the head to the rear.

　　*Hold yarn shelf: can use Cylinder bobbin, Conical Cone and etc.

　　*Anti-Ribboning device: it has a intermittent switch in the Electronic box to make the motor rotating turning on and off circularly.

　　*Traversing gear: it installed grooved-drum traversing gear to remove the hard edges of the cone.

　　*Waste yarn Cleaning device: it can optional to install GUO13A type to-and-fro blowing cleanser on the machine.

　　*Machine size: L13795 x W1122 x H1615mm (it’s 100 spindles size ).

　　*Motor Specification: Main Motor, JF0-32A-4, 1.8Kw, 380V, and 1440 RPM, 2 sets.

　　Auxiliary Motor, FW11A-6, 0.37Kw, 380V, and 960 RPM, 1 set.

　　*Triangle belt: A1800, 6 pieces

　　The machine can optional install Electric Cleaner, Length counting device per spindle, time counting device, Frequency Inverter Controller, Air Splicer and etc.