Specifications: HBM-270 synthetic latex is a stable, easy to use and special soft-self-cross linking acrylic emulsion. Physical properties of the latex Polymer style ……. Self cross linking pure acrylics Glass transition temperature…..About subzero -20°C Solid Content percentage ………40+-1% Burchfield viscosity(25 degree Celsius,No.2 rotor, every minute 60 times rotate)…………………lower than 100CP Particle diameter……………0.1-0.2μm Ionicity ………………………. Anionic Minimum film forming temperature………0°C Application method: HAIBOMU synthetic latex HBM-270 have good thermal stability, Can be widely used in various non-woven fabric production, include: Spray adhesive nonwoven, impregnated bonded nonwoven, Impregnated foam adhesive nonwoven etc. It can be mixed with HBM-295H,then we can get appropriate hand feeling of the fabric. Thermosetting conditions: The right thermosetting conditions are decided by individual nonwoven products and method, in the case of general, when hot set 1 minute on condition 135-145°C,can make non-woven fabric has excellent wash ability. Storage Conditions: Product should be stored in a sealed container, avoid freezing and high temperature, where possible, should be used within six months. Recommended normal storage temperature is 10-35°C. Please send your samples to Mr Jimmy Yang. The information is as below: Xinhua Share CO.,LTD.Fujian Address:Export Department Xinhua Industrial Park Niancuopu Longhu Jinjiang Fujian China P.C.:362241 Tel: 0086-18965687680 Fax: 0086-595-85256255 Contact person:Mr. Jimmy Yang synthetic latex(HBM Nonwoven)