Usage:

This laminator used in gluing and laminating EVA, sock lining, fabric and other materials. Apply to adhesive environment friendly materials such as shoemaking, cloth making, bag, case, sport products, sofa, automobile cushion, etc.

Characteristics:

1.environment friendly laminator

2.It is upgraded substitute machine of traditional super-glue laminating machine, also adhesive sheeted EVA with fabric are available.

3. It also has a long time suitable without distort and other good characteristics such as even, comfortable handle, permeability.

4.Pressed by heat-proof ventilate mesh to add adhering strength.

5.Thick laminated or entire bunch of sheeted materials all can be laminated well by mightiness conveyor force pressing, which will make the sticked product more firmly.

6.Surface of heating roller is coated with Teflon in order to  efficacious prevent the hot melt adhesive against sticking on the surface of roller and carbonization

7. It equipped with speed regulation system VVVF control, and automatic temperature control system; it also can measure the length, easy to control production output and product quality.

8.Spreading width can be momentarily designed according to the clients requirement to control the cementing amount,diameter of heating roller is optional

9. Adjust the speed of heating roller according to the working requirement,both colloid trough and heating roller can control temperature independently.

10. New design structure, reliable technology, easy operation, low breakdown rate, long service time.

11. High-efficiency cooling device insure the application range of the basic materials.

Range of application
This hot melt laminator is siutable for producting  as following:

1. Shoe making materials, such as EVA with fabric, fabric with leather, fabric with fabric, fabric with PE film, etc.

2. Clothmaking materials, such as fabric with waterproof film, fabric with fabric, fabric with fur, etc

3. Sport products making, such as EVA with fabric, waterproof film with fabric, etc

 Main parameter:

Caution for using YA-06B Hot Melt Laminator

1. The machine surface should be without watermarks, oil, dust, debris, large drum, mesh belt, rolling wheels, idler pulley, plastic pots, plastic roller, pulp wheel, knife plate should wipe, wash clean.

2. Strictly prohibited on-load open, barrier gate.

3. Motor can never exceed the load (110%); accelerate, deceleration turning "speed adjustment" knob should be careful, and gradually transferred to the required speed, or easily damaged motor.

4. Forbid to operate "positive inversion switch" when machinery is in running, otherwise fragile to damage converter and motor.

5. To adjust the wheel of stepless variable speed machine can fine-tune the tightness of gluing when machine running, keep material speed synchronous with the heating roller, but prohibit to rotate the hand wheel when machine stop, (that is to say can not change speed), Otherwise, easy to damage stepless gearbox.

6. Keep waxing regularly on stepless gearbox, motor belts, often add oil in chains, bearings, cylinder stroke, and change oil regularly in worm gear reducer to ensure its lubrication, running well.

7. Handle scraper board carefully, otherwise easy to damage the gluing embossing roller.

8. Big electric box should open regularly t check the time relay and intermediate relay whether loose or not, inside dust, cotton and other dirty (miscellaneous) material to be removed regularly to prevent blockage of cooling channel converter inconvenience of the machine.

9. Inverters data has been set well before leaving the factory, non-professionals is strictly prohibited to change, set, disassembly and repair.